Connect The Scanner To A Computer To Display Or Copy The Images; Care And Maintenance; Troubleshooting - Clas Ohlson Ps970S Bedienungsanleitung

8. Connect the scanner to a computer to display
or copy the images
1. Connect the USB cable to the USB connection on the scanner (16) and to
a USB port on the computer.
2. Switch on the scanner by pressing [
3. "Capture" appears on the display.
4. Press [ ◄ ] or [ ► ] to move to USB MSCD.
5. Press [ ENTER ] to confirm that you want to connect to the computer.
6. When the scanner is connected to the computer, the display on the scanner
is switched off.
7. The scanner appears in Windows Explorer as a "Removable Disk".
8. Double click on the Removable Disk that has been created in Windows Explorer
to display the images.

9. Care and maintenance

• Remove the USB cable before cleaning.
• Wipe the product with a moist, soft cloth. Use a mild detergent – never use
a solvent or strong, abrasive detergent, as this may damage the product.

10. Troubleshooting

It's not possible to connect
the scanner to a computer
and display the images
on screen.
How can I display/copy
images from the internal
memory?
]; it will start after a few seconds.
• Check that the USB cable is connected correctly
between scanner and computer.
• Try to connect to the computer again, taking care
to follow the instructions in: 8. Connect the scanner
to a computer to display or copy the images.
• Remove the memory card and restart the scanner.
• Connect to the computer in the usual way to
display the images.
14