Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Field of application:
The EoC 10-02 connects WiFi and Ethernet devices over established coaxial
cable to an EoC 10-01 Master.
The EoC 10-01 Master connects the EoC network to the Internet. The advan-
tage of an ethernet over coax solution is, that no network cables must be laid.
The data is transmitted through the low-attenuation return path of the coax
network.
Scope of delivery
9 EoC 10-02
9 CAT5 ethernet cable
Connects from LAN port to Ethernet devices as PC or STB
9 12 VDC power adapter for power supply
Front view
Rear view
Hardware connections:
Select a convenient location for the EoC near the PC or Ethernet device to
which it will be connected. The device should be kept away from excessive
heat.
Please make sure the coaxial network is well grounded.
Use a coaxial cable to connect the G.hn port to the on the antenna wall
outlet.
Use another coaxial cable to connect the TV port to a TV set (optional).
Connect the LAN1/LAN2 port to your Ethernet-equipped device.
Connect the power adapter to the DC12V port and connect it to a wall
outlet.
Configuration
The configuration of the EoC 10-02 is done with the EoC 10-01 Master.
Detailed operation instructions of the devices are available at
www.axing.com at the section Downloads | Operation instructions.
Ports on the rear panel:
Port Name
Type
Functions
Button
A G.hn
F
Connect to the antenna wall outlet
B TV
F
Connect to TV
C LAN1/LAN2
RJ-45
Connect to PC or STB or other Ethernet devics
D R
–
Reset Button
E DC12V
DC
Connect to the power adapter plug
C
A
B
1
2
3 4
LED Indicators on the Rear Panel:
Status
LED
On
Flashing
Link
Receive or
Link
Act
transmit
1
Green: High
Quality
Orange: Medium
Red: Low
LAN2 Link
Receive or
2
Link
Act
Transmit
3
LAN2 1000
1000Mbps
N/A
LAN1 Link
Receive or
4
Link
Act
Transmit
5
LAN1 1000
1000Mbps
N/A
6
Verbunden
Emfang/Senden
Powered by
7
PWR
N/A
DC12V
D
E
5
7
6
OFF
Disconnect or
Link fail
Disconnect or
Link fail
100Mbps
Disconnect or
Link fail
100Mbps
Nicht verbunden
Not powered
Werbung
