Berger und Schröter 31881 Bedienungsanleitung Seite 17

Shot lag
Set the time of delay shooting when the camera detects the motion. In
the selected time, the camera will not record any image or video. This
function can avoid to store too much same event and save more ca-
pacity.
Options: 5 seconds~60 minutes.
IR distance
Set the distance of infrared induction.
Options: Near / Middle / Far.
Sensitivity motion sensors
indoors, you can choose "Low". In outdoor, choose "Middle"in normal
condition. Choose "High"if the environment impact is huge outdoors.
The temperature can also influence the sensor sensitivity. "High Sensi-
tivity"applies to mild environment. "Low Sensitivity "applies to cold en-
vironment.
Options: Low / Middle / High.
Target recording time
Set the target recording time. As shown in below picture, you can set
the start and stop time. The camera will work just in the stated time slot.
In other time, the camera will keep in standby state.
Options: On / Off.
17