Amplicomms AW 500 Einstellungen Seite 12

S
ETTINGS
6 Press button 3 to toggle between "A" and "P".
7 Press button 5 to confirm the setting.
8 The digital clock lights constantly during this process.
The current time is displayed for 15 seconds. If you
press button 3 during this period, the hour digits will
flash and you can change the digital time setting again
(-> step 2); otherwise, the clock returns to the normal
display.
Note: The backlight will be on during setting process.
Checking the digital time setting
1 Press and hold down button 1 for approx. 1.5
seconds, the time is displayed (flashing hour digits).
Do not press any button. After 15 seconds the clock
returns to the normal display.
Alarm time setting
You can set 5 alarms that can be turned on/off indepen-
dently of each other. You do not have to enter the alarms in
chronological order.
10
Helpline UK 0844 800 6503
(See on page 15 for costs and hours of operation)