Herunterladen Diese Seite drucken

Corturi24 PROFESSIONAL Bedienungsanleitung

Partyzelt - 2,6m, 7m series (7x10m, 7x12m, 7x14m, 7x16m)
7m - Series
PROFESSIONAL – 2,6m
EN
Party Tent
DE
Partyzelt
RO
Cort Evenimente
EN: Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored.
DE: Bitte lesen Sie die VOLLSTAENDIGE Bedienungsanleitung. Das Zelt MUSS sicher verankert werden.
RO: Va rugam sa cititi TOATE instructiunile inainte de asamblare. Acest cort TREBUIE sa fie ancorat in
siguranta.
EN: This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy
winds, snowfall or ice.
DE: Dieses Zelt ist ein temporaerer Aufbau und sollte bei widrigen Wetterverhaeltnissen wie Sturm,
Schneefall oder Eis abgebaut werden.
RO: Acest cort este gandit ca si constructie temporara si trebuie dezasamblat cand conditiile meteorologice
sunt aspre: vant puternic, ninsoare sau gheata.
EN: Warnings
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. The
owner of the tent has the sole responsibility to make sure that these local rules are followed and that the
mounting is correct.
We are not responsible for damage to the unit or the contents from acts of nature.
It is always recommended that you secure your tent properly with storm straps and ground pegs when you
put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty Anchor are sold
separately and are not included in this product.
Periodically check the anchors to ensure stability of shelter.
In case of extreme weather conditions, the tent cover must be removed.
Any shelter that is not anchored securely has the potential to fly away causing damage. We are not
responsible for any shelter that blows away.
1
loading

Inhaltszusammenfassung für Corturi24 PROFESSIONAL

  • Seite 1 7m - Series PROFESSIONAL – 2,6m Party Tent Partyzelt Cort Evenimente EN: Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored. DE: Bitte lesen Sie die VOLLSTAENDIGE Bedienungsanleitung. Das Zelt MUSS sicher verankert werden. RO: Va rugam sa cititi TOATE instructiunile inainte de asamblare. Acest cort TREBUIE sa fie ancorat in siguranta.
  • Seite 2 7m - Series PROFESSIONAL – 2,6m This canopy is intended to protect against the effects of sun, rain, light snow, etc. It is not designed to hold the loads that can accompany wind, rain, snow or ice storms. This structure is not tested for specific snow, rain and wind loads.
  • Seite 3 7m - Series PROFESSIONAL – 2,6m Sich auf der Dachplane sammelndes Wasser, Schnee oder Eis muss umgehend entfernt werden. Bitte nutzen sie keine bleichenden oder stark reibenden Produkte um die Plane zu reinigen. Sie koennen die Plane mit einer einfachen Seife und Wasser reinigen.
  • Seite 4 7m - Series PROFESSIONAL – 2,6m Evitati deteriorarea materialului. Plasati cortul astfel incat sa nu intre in contact cu crengi sau parti de cladiri. Amplasati cortul departe de surse de foc si luati in considerare directia vantului. Lasati cortul sa se usuce in pozitie verticala. Prelatele trebuie sa fie uscate inainte de pliere si ambalare.
  • Seite 5 7m - Series PROFESSIONAL – 2,6m Assembly Instructions / Aufbauanleitung / Instructiuni de asamblare EN: Step1. Assembly is easiest if you layout all parts on the ground as shown below. 7x10m has 5 sections, 7x12 has 6 sections and7x14m has 7 sections.
  • Seite 6 7m - Series PROFESSIONAL – 2,6m...
  • Seite 7 7m - Series PROFESSIONAL – 2,6m EN: Step2. Connect the roof poles and connectors from middle and out. To ensure the screws (M8x50mm,M8x70mm) fixed to every pole tightly. Tips: Make sure all the poles are pushed all the way into the connectors and all screws are tightened.
  • Seite 8 7m - Series PROFESSIONAL – 2,6m...
  • Seite 9 7m - Series PROFESSIONAL – 2,6m EN: Step 3: Put the roof cover (38) on the frame and insert leg poles (8 + 7) into one side as shown below. Lift the opposite site of the frame and insert remaining leg poles (8 + 7) to finish the tent framework with M8x70mm screws with wing nuts.
  • Seite 10 7m - Series PROFESSIONAL – 2,6m EN: Step 4: Use M6x60mm Screw and M6x45mm Screw to fix the corner reinforcement (6). Fix all set of ground bars (2,9) and connectors (18, 19, 20) to finish the tent framework as below drawing.
  • Seite 11 7m - Series PROFESSIONAL – 2,6m EN: Step 5: Attach side panels (37) and end door panels (38) to the frame and roof with bungee balls(26,27 )as shown above. Caution: Safety Goggles must be worn when secure the bungees. DE: Schritt 5.: Befestigen Sie die Seitenplanen (37), Giebelseiten (38) und das Dach mit den Gummieschlaufen wie oben aufgefuehrt.
  • Seite 12 7m - Series PROFESSIONAL – 2,6m Parts List/ Artikelliste / Componente Quantity Part no. Drawing 7X10m 7x12m 7x14m 7X16m No. 1 50x1430mm frame pole No. 2 38x1920mm frame bar No. 3 38x1920mm frame pole No. 4 25x1735mm frame pole No. 5...
  • Seite 13 7m - Series PROFESSIONAL – 2,6m No. 11 140° 3-way joint No. 12 140° 4-way joint No. 13 110° 4-way joint No. 14 140° 4-way joint No. 15 110° 4-way joint No. 16 4 way joint flat No. 17 3 way joint flat No.
  • Seite 14 7m - Series PROFESSIONAL – 2,6m No. 21 Steel wire buckle set No. 22 Tube peg No. 23 Guy line 5m No. 24 Thick Peg 6x180mm No. 25 Thin peg 4x180mm No. 26 Short bungee ball No. 27 Long bungee ball No.
  • Seite 15 7m - Series PROFESSIONAL – 2,6m No. 36 Roof No. 37 Side panels No. 38 door panels Martin Corturi Evenimente SRL - Bulevardul Tudor Vladimirescu 41, Bucuresti 050811 Contact rapid: 0742 491780 / contact@corturi24.ro...