Sanitary-Grade Acrylic; Cleaning; Damage; Controls - Duravit Jet Project Bedienungsanleitung

> Drain the water and rinse the tub.
> Fill the tub with water again.
> Switch on the jet nozzles for 5 minutes.
> Drain the water.
> Repeat the process as necessary.

6.2 Sanitary-grade acrylic

Cleaning

> Clean acrylic with a soft damp cloth.
> Use the Duravit Acrylic Surface Maintenance Set (Art. no. # 790301 00 0 00 0000) for
the occasional thorough cleaning and for removing stubborn spots.
> Remove extensive soiling with warm water and a liquid detergent, dish washing
liquid or soap suds. Do not use anything abrasive as this will cause damage.

Damage

> Remove scratches and other surface damage with the Duravit Acrylic Surface Main-
tenance and Repair Set (Art. No. # 790302 00 0 00 0000).

6.3 Controls

> Clean the controls with a soft damp cloth.
6.4 Cable-driven waste and overflow
> Clean the cable-driven waste and overflow with a soft damp cloth.

7. Disposal

Dispose of the packaging in an environmentally-friendly manner.
The whirltub must be disposed of in an orderly, environmentally-friendly manner ac-
cording the standard regulations that apply in your local area. Electronic components
must be recycled. Please consult the recycling point in your area.
20