Menu Options - HK Audio FirNet Schnellstartanleitung

Menu Options

A General Survey of Menu Options
Mute Output A/B/C/D
These control keys serve to mute individual outputs.
Simply press and hold the Admin key while pressing
key 1 to 4 to select and mute an output.
A General Survey of Control Keys
8
Start Menu - Viewing Current Settings
The device begins booting as soon as it is connected to the mains supply
and powered up. The display fi rst reads TEST, and then a < symbol
wanders across the display. At the end of the boot sequence, the display
indicates the current fi rmware for about two seconds.
Then the controller's start menu shows the following parameters:
• Preset no.
• Controller name and LAN status
• Current IP address
• Current scene
• Current routing
• Routing input
• Current input
• Current sample rate
• Current synchronization status
• Current fi rmware version
Adjusting Parameters
Controller Menus
Five menu options are available for editing individual parameters. Simp-
ly press the appropriate key to select a menu.
Selecting Speakers
A quick run-down on how to select the speaker series and the right fi lter
for the connected speaker(s) follows.
Settings
Load Scene - Accessing Previously Stored Settings