Herunterladen Diese Seite drucken

Werbung

VXi Corporation | 271 Locust Street, Dover, NH 03820 USA
Toll Free | Sans frais | Número gratuito | Gebührenfrei: (800) 742-8588
Phone | Téléphone | Teléfono | Telefon: 1 603 742-2888
vxicorp.com
© 2016 VXi Corporation
All other trademarks are property of their respective owners | Toutes les autres marques commerciales
sont des marques de leurs propriétaires respectifs | Todas las demás marcas son propiedad de sus
respectivos dueños | Alle anderen Markenzeichen sind Eigentum der jeweiligen Inhaber
Printed in China | Imprimé en Chine | Impreso en China | Gedruckt in China
APN 203427C
INSTALLATION
1. Remove the panel from the bottom
of the base station. (Refer to the
VXi wireless headset user guide for
additional information).
2. Attach the VEHS-S1 to the bottom
of the base by carefully inserting the
plastic guide pin into the screw-hole
socket. Then gently press together the
rear of the base and VEHS-S1 until it
snaps into place.
3. Insert the color-coded cables from the
VEHS-S1 into the corresponding color-
coded jacks of the base station; the
connectors should 'snap' in place when
fully inserted.
TEL WALL
EHS/LIFTER
POWER
BASE JACK
HANDSET
JACK
* This user guide describes the installation steps to connect the VEHS to your phone. For information about your phone's
capabilities or provisioning requirements go to www.vxicorp.com/resources/vehs, visit your phone system manufacturer's
website, or contact your IT administrator.
4. Select the correct adapter cable
(included) and connect it to the
longer VEHS-S1 cable. Connect the
opposite end to the AUX/EHS port on
the phone.
Phone Mode
Cable
Connection Port
300 Series
A
AUX
800 Series
B
EHS
700 Series
C
**
**Included with VEHS-S1+700 only.
Additional Information for V-Series DECT
Headsets
- Base station should be in MODE 2.
- 'Compatibility Switch' should be placed in
the 'D' position.
LED Status Indicator
The LED status indicator indicates the
phone's mode as shown by the table below.
Phone Mode
LED indicator
On-hook
Solid on
Off-hook
Slow flash
Fast flash
Incoming ring detected

Werbung

loading

Inhaltszusammenfassung für VXI VEHS-S1

  • Seite 1 ‘snap’ in place when fully inserted. VXi Corporation | 271 Locust Street, Dover, NH 03820 USA Toll Free | Sans frais | Número gratuito | Gebührenfrei: (800) 742-8588 Phone | Téléphone | Teléfono | Telefon: 1 603 742-2888...
  • Seite 2 JACK BASE JACK HANDSET siguiente tabla. Modo del teléfono Indicador LED 2. Fijar el VEHS-S1 a la parte inferior de 4. Seleccionar el cable correcto del Modo encendido Luz encendida la base, insertando cuidadosamente adaptador (incluido) y conectarlo Modo apagado Parpadeo lento de luz el pasador guía de plástico dentro...