Remote Control - Overmax Aeri 6.0 Einleitung

The indicator (7) shows temperature (TEMP) and humidity (HUMID)
alternately.
Humidity intensity level indicator (6) shows a current operation mode:
low – medium – high. To change the level, press MIST +/- (4).
To set an automatic switch, press (2). In the display (8) you will see the
amount of time remaining before the device switches off. You can
choose 1, 2, 4 and 8 hours.
To switch the display backlight off, hold the button (2). Press any button to
restore backlight.
To set warm steam mode, press HEAT (3) button. Preheating indicator (5)
will go on and the steam will heat up to reach the temperature of
25-35°C.

REMOTE CONTROL

1
2
3
4