Hama RTR-100 Bedienungsanleitung Seite 11

3. Setting the input level
The FM-Transmitter "RTR-100" has a level display to ensure that the music
is transmitted to the radio at the best signal quality.
The following explanations describe the individual letters in the display:
Low input level;
L
the signal is too weak
Excessive input level;
H
the signal is too strong
M
Optimal input level
Adjust the volume of the audio device until the optimal
input level is displayed.
4. Program memory
Proceed as follows to save a station:
– Set the required frequency using the
Up/Down buttons.
– Now press the On/Off button briefl y until the
MEM symbol fl ashes (Save).
– Select one of the six station settings (1-6)
using the Up/Down buttons.
– Press the On/Off button again to save the
selected position.
If you want to switch between the individual stations press
the On/Off button briefl y.
10