Control Panel; Remark; Specification - CombiSteel 7013.2515 Gebrauchsanweisung

Blending Fruit & Vegetable
1. Put fruit or vegetable and little water into the container.
2. Set medium speed or high speed.
3. Turn On SET switch, after 4-6 seconds blending, when the material roll smoothly , which means the material
has been enough mashed, Stop the machine at once, to prevent over blending.
Note:
1. Inching switch is mainly for testing or blending special materials, do not use it frequently.
2. Do not run more than 2 minutes when blending dry materials.

Control Panel

VARIABLE SPEED Dial
Allow user to select continuously variable motor speeds ranging from 16000rpm to 29000rpm.
PULSE switch is overrides the variable speed dial.

Remark

1. On all units the built-in thermal sensor keeps track of how hot the motor gets and will automatically
shut down the motor if the motor is overheating. User should remove the container and run the
machine until cool. This takes about 2 minutes.
2. Special Note:
Please check your operation when the motor is overheated. If the machine run all the day or the
material is too thick , it will easy to get overheated.

Specification

Model
Voltage
Capacity
Endurance of Container
Power
Weight
Length of Cord
Dimension
Protector
*110V machine is available in 15A plug. 220V machine is available in 10A plug.
7013.2515
230V~50Hz
-40℃~180℃
W210xD230xH520mm
Current protector, Thermal protector for motor
www.combisteel.com
Mechanical Control Panel
ON/OFF Switch
Up for ON; Down for OFF.
HIGH/LOW Pulse Switch
Up for High speed at 29000rpm;
Down for Low speed at 16000rpm.
Pulse button can only be used
when the power switch is ON, The
PULSE switch can be used to quickly
refresh product in the container by
depressing the switch and holding
down as long as needed.
2000c.c
1500W
5.5kgs
1.8M
4