Description Of Functions - Overmax Aeri 4.0 Bedienungsanleitung Und Kochleitfaden

DESCRIPTION OF DISPLAY AND KEYS
Hygrometer indicator
Humidity level
Ionization indicator
Humidity Night light Ionization

DESCRIPTION OF FUNCTIONS

Connect the device to power supply – you will see OVERMAX message
and the device will switch into standby mode.
Press On/Off switch to start the device.
When water is missing in the tank, you will see no water indicator.
By default the device operates in the regular humidification mode. To see
a required humidity, press "Humidity" key and set humidity percent. A hy-
grometer indicator will go on. In this mode, when the device reaches the
preset humidity, it stops humidifying and resumes when the humidity drops
below this value.
Press night light key to switch the display off. Press any key to restore night
light. Press „Ionization" key to activate steam ionization. Ionization indica-
tor will be illuminated.
To set automatic shut-off of the humidifier, press timer key – on the screen
you will see remaining time before the shut-off – from 1 to 12 hours. If the
function is enabled, the indicator will show temperature and time before
shut-off alternately.
To set humidification intensity level, press humidification level key. Three
modes are available: low (1), medium (2) and high (3).
No water in tank
indicator
Temperature/timer
indicator
Humidification level
Timer Humidification
level
On/off
switch