Hama 00049002 Bedienungsanleitung Seite 2

USB 2.0 4Port Hub
USB 2.0
4Port Hub
Remarks:
If your computer does not have built-in USB2.0 compatible port, we recommend
connecting the USB 2.0 to USB 2.0 PCI Card for High-speed USB 2.0 connection.
USB 1.1 devices can't operate at USB 2.0 speeds even when connected to a USB 2.0
hub or host adapter.
Specification:
Interface
USB Standards Compliance
Transmission Speed
External AC adapter Index
Operating temperature
Operating humidity
Dimension
Weight
Packing List:
1. The USB 2.0 Hub
2. AC adapter(DC6V, 2.1A )
3. This Manual.
User's Manual
4A Female
1A male
The USB 2.0 Hub
AC adapter(DC6V, 2.1A )
This Manual.
This package contains each of products listed above.
One Upstream Port (USB A male)
Four Downstream ports (USB A female)
Meets USB 2.0 specs
Support high speed (480 Mbps)
and full speed (12 Mbps)
and low speed (1.5 Mbps)
Input: 100-240V~0.5A MAX, 50-60Hz
Output: +6V/2.1A
o o
0 C to 70 C
5% to 90% (non-condensing)
59 x 40.5 x 26 mm
55g
Introduction:
This 4 Port USB2.0 hub is compliant with latest USB Spec Revision 2.0, i.e. support high-
speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data transaction rate. It
is fully backward compatible with previous USB 1.1 products. You will enjoy the high-speed
that USB2.0 technology provides, particularly when you are operating the devices, which
need mass data transmission, such as DV Camcorder, Digital camera...etc.
Features:
Compact design for easy use.
Compliant with USB Specification Revision 2.0.
All four type-A USB ports support high-speed (480 Mbps), full-
speed (12 Mbps) and low-speed (1.5 Mbps) data transmission.
A maximum of 127 devices can be supported.
Support Self-powered mode & Bus-powered mode.
System Requirements:
Use with IBM PC or Mac compatible with enabled USB ports (a USB 2.0 port and
USB 2.0 drivers are required for USB 2.0 operation)
ME, 2000 Professional and Windows XP
OS X 10.1or later
USB 2.0 Drivers (for high speed USB 2.0 )
CAUTION! :
Computer must be USB2.0 compatible; otherwise it will be treated as
USB1.1 Hub.
The USB 2.0 Hub must to be connected in AC Adapter.
1
2