Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
SPECIFICATIONS
WIRING DIAGRAM
INSTALLATION DIAGRAM
INSTRUCTIONS
1. Before power is supplied to the fan, ensure that the voltage and frequency is the
same as the nameplate.
2. Assembling the guard and the blades.
2.1. It is fixed the back guard on the motor by the mounting screw.
2.2. It is loosened the cap nut. Fixes the blades on the rotor shaft by locked the
blade's screw. Finally locked the cap nut into the rotor shaft.
2.3. It is fixed the front guard on the back guard by locking the guard's screw.
3. The switch has for buttons numbered 0, 1, 2 and 3, including off, slow,
medium and fast, respectively.
4. The oscillation switch controls the swing of the fan.
Werbung
Inhaltsverzeichnis
