Monacor DPR-10 Bedienungsanleitung Seite 10

2) To select the jacks AUX INPUT, press the but-
ton FUNC repeatedly until
the display .
3) Press the button REC . The display will show
Waiting....
– When a memory card is inserted or a USB
flash drive is connected, recording will
start after a preparation period of approx .
10 seconds .
– When a memory card is inserted and a
USB flash drive is connected,
or
[CARD]
play after 2 seconds . Use the buttons ,
 / REV – SKIP – CUE to select the storage
medium to be used for recording . Then
press the button REC again . Recording will
start after a preparation period of approx .
10 seconds .
4) During the recording,
or will appear on the display . To stop
[USB]
recording, press the button STOP /  .
Notes:
1 . The unit will create the folder TMC_AUX on the
storage medium for its own recordings . The follow-
ing names will be assigned to the files recorded:
REC_AUX .mp3
REC_AUX001 .mp3
REC_AUX002 .mp3
etc .
The date and the time of the files, however, are not
correct . The folder name and the file names can be
changed with a computer .
2 . If a recording is distorted, reduce the volume of the
unit connected . (The signal level at the jacks must
not exceed 800 mV .)
4.4 Copying audio files or entire folders
Individual audio files or entire folders can be
copied from a memory card to a USB flash drive
or vice versa .
1) Use the button FUNC to select the storage
medium containing the title to be copied
(indication
CARD
2) Press the button REC . The display will briefly
show
RECORD
All rights reserved by MONACOR
reproduced in any form or by any means for any commercial use.
10
appears on
AUX
will appear on the dis-
[USB]
RECORD Ɗ [CARD]
or ) .
USB
. Then the magnifying glass
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be
®
symbol
flashing and, next to it,
The folder search function is activated .
3) Use the buttons ,  / REV – SKIP – CUE to
select the folder to be copied or the folder
containing the file to be copied .
4) To copy the folder selected, press the button
REC again, or
to copy a single file from the folder selected,
keep the button REV, CUE,  or  pressed
until
Target
glass symbol . Then briefly press the button
REV, CUE,  or  to select the file to be
copied . Press the button REC to start cop-
ying .
Note: The copy process can be stopped at any time
with the button STOP /  .
4.5 Deleting individual audio files
1) Use the button FUNC to select the storage
medium containing the file to be deleted
(indication
2) On the remote control, press the button
DEL; the display will briefly show
Then the magnifying glass symbol
lower left corner will start flashing and, next
to it,
function is activated .
3) Use the buttons REV – SKIP – CUE to select the
folder containing the file to be deleted .
4) When the folder has been found, keep the
button REV or CUE pressed until
shown next to the magnifying glass symbol
. Then briefly press the button REV or CUE
to select the file to be deleted .
5) To delete the file, press the button DEL . The
display will briefly show
6) To delete further files, repeat steps 2) to 5) .
Note: The process can be stopped at any time with
the button STOP /  .
Subject to technical modification .
in the lower left corner will start
Dir
is shown next to the magnifying
File
or ) .
CARD USB
will be shown . The folder search
Dir
DELETE
will be shown .
.
DELETE
in the
is
File
.