Herunterladen Diese Seite drucken

Werbung

Battery configuration
This headlamp has been configured with a lithium-
ion rechargeable battery pack, which can also be
adaptable to charging your other portable devices.
(notes and specifications see below)
To power the head lamp, connect it with the battery
pack through provided USB cables.
The long cable is intended for reaching the battery
pack when clip on the waist belt, the short cable
is intended to clip the battery pack onto the bracket
of the head band.
The power switch is set on the battery pack, which
allows to switch off the power from any status.
To prevent from accidental discharge, the system
will turned off automatically if there's no output/
load detected within 5 seconds.
A press button switch on the light is provided to
shift from different light pattern.
200/320
press
power
button
off
green
press
light
press power button
switch
read
low
med
* the "med" mode is not available for Glacier 320
200
320
Battery specifications
- Rechargeable lithium ion battery: 3200mAH
- Mini USB input : 5V/500mA
- DC 12V adaptor input : 12V/500mA
- USB output : 5V/1000mA
Charging battery pack
Connect battery pack to a USB port on a
running desktop or computer, or, to a DC
12V socket within a running car.
One fully charged Glacier battery pack charges:
Charging/battery indicator
- The indicator will blink when it's in charging,
and it'll turn into steady green when it's full.
- The indicator will also show the battery status
at start of using, or by a single click of the
high
sos
power button when it's not in use :
Red - battery exhausted
Orange - less than 40% battery remain
Green - more than 40% battery remain
www.brunton.com
USB output
Charging/
battery indicator
(flip up)
mini USB input
DC12V input
Power button
SMART PHONE
MP3 PLAYER
GPS
RUNNING WATCH
2X
8X
3X
3X
Charging your device :
Connect your phone or device using the device-
specific USB cable to the USB output, then press
the power button till indicator is on, then your
device will begin charging.
Hints :
to maximize the efficiency of the battery,
- fully charge the battery before using
- recharge the battery every 4~5 months when in
storage
- recharge the battery before it's drained completely
Notes :
- Do not short circuit, disassemble, or expose to fire.
- Do not submerge unit in water.
- Do not expose to temperatures greater than 60℃
- Recycle according to local regulation.
Please register your Glacier 200/320 by visiting
www.brunton.com/register. Brunton has taken
every effort to ensure years of trouble-free use
from your new product. This productis guaranteed
to be free of defect in material and workmanship
according to local regulatory requirements. This
product is not subject to guarantee from third-
parties and is subject to change. Brunton will
ACTION CAMERA
4X
repair or replace with a new equivalent, without
charge for parts or labor, per Brunton's discretion.
Brunton cannot be held responsible for accidents,
damages or injury occasioned by the use of this
product. Warranty will be rendered invalid if
product is damaged by tampering, negligence,
or misuse.
BRUNTON
7088 Winchester Circle
Boulder, CO 80301

Werbung

loading

Inhaltszusammenfassung für Brunton Glacier 200

  • Seite 1 Charging battery pack To prevent from accidental discharge, the system Connect battery pack to a USB port on a Please register your Glacier 200/320 by visiting will turned off automatically if there’s no output/ running desktop or computer, or, to a DC www.brunton.com/register.
  • Seite 2 Gerätes. pièces ou main d’œuvre, à sa seule discrétion. Brunton ne saurait être tenu pour responsable de tout accident, dommage ou blessure résultant de l’utilisation de ce produit. La garantie sera annulée si le produit est endommagé suite à une modification, une négligence ou une...

Diese Anleitung auch für:

Glacier 320