Battery Charge Level/Low Battery Indication - Esscom TWINTALKER 9200 Bedienungsanleitung

Esscom Twintalker 9200

12 Battery Charge Level/Low Battery Indication

The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the
BATTERY icon on the LCD Screen.
When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that
the batteries need to be replaced or recharged.
13 Using the Twintalker 9200
13.1 Stopwatch
• Press and hold
• Press to start counting
• Press to stop counting
• Press to reset the timer
• Press and hold
13.2 Turning the Unit ON/OFF
• To activate; press and hold
current channel, CTCSS code and time.
• To switch off; press and hold
displayed.
13.3 Adjusting Speaker Volume
13.4 Receiving a Signal
In order for other people to receive your transmission, they must be set
on the same channel and CTCSS code
8
for 4 seconds to enter stopwatch mode
for 4 seconds to exit stopwatch mode
. The unit will "beep" and the LCD Screen will display the
again. The unit will "beep" and only the time is
The Speaker Volume can be adjusted using
Volume level is displayed on the LCD.
The unit is continuously in the RECEIVE mode when the unit is ON and
not transmitting. When you receive a signal on the current channel, the
RX icon is displayed.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
and . The Speaker
Esscom Twintalker 9200