Kendau SG-110 Kurzanleitung Seite 2

KENDAU SG-110 Sport GPS Watch
3
4
1) Getting Started with KENDAU SG-110 Sport GPS Watch
To get started with the KENDAU SG-110 Sport GPS Watch, please follow the steps described below:
1. Install Travel & Sports Suite software from the CD.
2. Connect the KENDAU SG-110 Sport GPS Watch to your PC using the USB cable.
3. Keep the KENDAU SG-110 Sport GPS Watch connected to PC and charge for at
least 4 hours prior to first use.
4. Unplug the KENDAU SG-110 Sport GPS Watch from PC once fully charged, and
press the „Power/Menu" button for 2 seconds to power on.
5. On the KENDAU SG-110 Sport GPS Watch, enter your user profile for calculation of
Maximum Heart Rate and Calories burned.
6. Connect with Heart Rate Monitor (optional):
- On the main menu, select: Bluetooth > Scan.
- Once paired, select Connect
7. On the KENDAU SG-110 Sport GPS Watch, select a display language, set the time,
and select a measurement unit standard.
Note: Before setting time, please go outdoors to obtain a GPS fix first.
2) Main Display
1. On the main display, long press the Menu button for 2 seconds to return to the main
menu.
2. Use the „Up" and „Down" buttons to toggle between menu pages, and then press
the „Menu" button once to select your option.
3. To exit the main menu without selecting any option, long press the „Menu" button
for 2 seconds.
Note: Menu pages will vary upon different models and firmware versions.
3) Icon Illustration
Current time
Number of satellites detected
Battery power indication
Bluetooth (solid: connected; gray: connecting or scanning; invisible:
turned off)
4) Function Page
Pressing the "Down" button for 2 seconds on main display turns ON/OFF the backlight.
1. Up
2. Down
3. Power /Menu
4. USB Port
5. GPS
1
2
5
Self-defined function page
Available data fields, e.g.:
- Speed
- Distance
- GPS
- Calories
- Pedometer
- Max. Speed
Quick guide
5) Compass
7) Location Navi
8) Track
9) Stopwatch
10) Lap
11) Altimeter
1) Detailed manual on CD-ROM
2) EG-Confirmation on www.variotek.com
6) Satellite
This main display includes POI information
uploaded from Route Planner, such as
current distance (e.g. 16.83 km), estimated
time of arrival (e.g. 20:49), and altitude
difference (e.g. 165 m). Pressing the "Up"
button for 2 seconds on the main display
sets up a POI of your current location.
This main display includes the track drawn
upon recorded waypoints.
This main display includes information like
Stopwatch (sec), Speed (km/h), and total
Distance (km).
This main display includes information
like Lap Time (the time taken to complete
one lap in seconds), number of laps taken
(laps), and Distance (km).
This main display shows a chart that
indicates the corresponding altitudes as
you move.