Emerio RG-104101 Bedienungsanleitung Seite 3

 Always remove the power cord and let it cool: before
moving the unit; before the unit is stored; before you go
mounting or dismantle parts; before cleaning or
maintenance work; after use.
 Only have the appliance repaired by a qualified service
centre.
 Qualified service center: after-sales service of the
manufacturer/importer, which is qualified to carry out
repair to avoid any kind of danger. In case of problems
please return the appliance to this service.
Electricity and heat
 Before use, check that the mains power supply voltage is
the same and the voltage is the same as the voltage
indicated on the appliance.
 Always plug the appliance into an earthed plug socket.
 Regularly check the power cord for damage.
 Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped or
damaged
manufacturer or the nearest authorized service agent for
examination,
adjustment.
 To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.
 Make sure the power cord does not come into contact
with hot surfaces or steam.
 Always remove the plug from the plug socket before you
move the appliance.
 The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
 If an extension cord is absolutely necessary, a 10-ampere
cord should be used. Cords rated for less amperage may
in any manner.
repair
Return
or electrical
appliance
or mechanical
to