Led Panel - Westfalia 86 84 54 Bedienungsanleitung

2. Lift the battery cover and take the battery out of the
compartment. It is placed reversed in the compartment by the
factory.
3. Turn it around and place it in the battery compartment in such
a way that the battery terminals engage in the connection
clamps on the machine.
4. Close the battery compartment cover.

LED Panel

There are five LED lights next to the switch, their functions are
described below. The 3 LED lights marked A are the battery
indicators:
 The red, green, and yellow lights turn on when the machine is
put into function.
 All three lights on indicates that the battery is in good condition
 The yellow and red lights indicate a low battery.
 The red light alone indicates an empty battery. This means the
battery has run out and the machine will seize to operate
shortly. This is to protect the battery from deep discharge,
which would shorten the life of the battery.
 The 2 LED lights marked B in the drawing below are the
charging indicators. The green light indicates that the unit is
connected to the power mains, the red light turn on while the
charge is in process. It turns off when the charge is complete.
A
Operation
16
B