Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Unscrew the crown by turning it counter-clockwise. Wind up the watch by
turning the crown clockwise between 30 and 40 times. Pull the crown ca-
refully to position 2 and set the watch to 7 o'clock. You may set the current
day with button A. With button B you may set the month. Push the crown
carefully to position 1 and set the date by turning the crown counter-clock-
wise. Pull the crown carefully to position 2 again and set the current time
by turning the crown clockwise. When finished push the crown carefully
back in to place and bolt it by turning it clockwise. The date/month must be
set manually at the end of the month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.
Werbung
Inhaltsverzeichnis
