The ID-100 is a DPM-reading device in industrial quality for all kinds of 1D and 2D codes. Engraved codes, punched codes and dot peened codes are as easily detected as postal barcodes as well as low-contrast, extremely compact and small barcodes.
2D-Codes 2D-Codes Data Matrix QR Code Micro QR Aztec Code Code 49 Codablock F Han Xin Maxi Code Gestapelte Codes Stacked codes PDF 417 Micro PDF GS1 Composite (CC-A / CC-B / CC-C) For questions regarding reader configuration contact www.di-soric-solutions.com...
The ID-100 reader defaults to Auto Mode. The Reading Mode automatically adjusts to optimize performance on various DPM barcodes. If your application involves only one type of DPM barcode, the ID-100 can be further enhanced by enabling the specific Reading Mode that works best for your barcode.
(i.e., Notepad, Microsoft Word, etc.) and read the Reader ID and Firmware configuration barcode. Ein Textstring zeigt Ihnen die ID-100 ID-Nummer sowie die Firmwareversion an. A text string indicating the firmware version and ID-100 ID number will be displayed. Beispiel / example: Xap/i08080808none0020309971A0600000076000001600620002 cd(13.2.18) (Siehe unten / see below): String Boot firmware...
The ID-100 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of the reader. Do not touch the window. Your ID-100 uses CMOS technology that is much like a digital camera. A dirty window may stop the ID-100 from reading barcodes.
Seite 10
KONTAKTIEREN SIE UNS CONTACT US di-soric Solutions GmbH & Co. KG Steinbeisstraße 6 73660 Urbach Germany Fon: +49 (0) 71 81 / 98 78 - 0 Fax: +49 (0) 71 81 / 98 78 - 177 solutions@di-soric.com www.di-soric-solutions.com HAUPTSITZ HEADQUARTERS di-soric GmbH &...