SPEEDLINK QUAD JOY-CON Anleitung Seite 6

EN
1. First plug the USB-C connector into the QUAD charging station.
2. Then plug the second connector into the USB port
on your NINTENDO SWITCH* dock.
3. Now slot the original Nintendo Switch Joy-Cons*,
which you want to charge, into the charging station.
4. The charging indicator will glow red if the Joy-Cons* are not fully
charged; once they are, the indicator will glow blue.
NOTICES
• Only operate the product using the supplied USB cable.
• The supplied USB cable must only be used with
the original QUAD charger.
• The charging station can only be used to charge
original NINTENDO SWITCH JOY-CONS*.
• Once the Joy-Cons* are fully charged, remove
them from the charging station.
• Insert the Joy-Cons* carefully into the charging
station to avoid damage.