Technical Specifications - EuroLite MD-1030 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Seite von 13

/ 13
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

For the version without power-plug (50301200):

The electric connection must only be carried out by a qualified electrician!

In order to connect the device to the mains, you have to install a power-plug.

The occupation of the connection-cables is as follows:

Cable

Brown

Live

Blue

Neutral

Yellow/Green

Earth

The earth has to be connected!

Connect the device to the mains with the power-plug.

If the device will be directly connected with the local power supply network, a disconnection switch with a

minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.

The mirrorball has to be connected via an appropriate installation (see above) with the motor. We

recommend to use the Chain for Mirrorballs up to 40 cm, length 33 cm, No. 50301600 or Chain for

Mirrorballs up to 40 cm, length 100 cm, No. 50301605.

The installation material must never include abrading material e. g. steel cables in order to avoid

The length of the chain must never exceed 100 cm.

Install the mirrorball chain with the screw-on chain link at the installation eyelet of the mirrorball and tighten

the fixation screw.

Insert the mirrorball chain with the mirrorball in the screw-on chain link and tighten the fixation screw.

Make sure that the rotation of the mirrorball is never slowed down or stopped by decoration material etc.

Make sure that no side forces can impact on the installation.

Make sure that the mirrorball cannot be moved by air streams. The mirrorball and the motor must be installed

and operated absolutely swivel free.

Please check in regular intervals, if the key ring or chain links have been deformed. Uninstall the mirrorball

immediately in such a case.

Before taking into operation for the first time, the installation has to be approved by an expert!