Aamgard AX03 Benutzerhandbuch Seite 7

170220
1. Common
The rear lamps of the AX03 series are available in six functional versions:
• AX03-F FIA homologated rain light
• AX03-D twin-stage lamp, brake light / FIA rainlight and tail light function
• AX03-X FIA homologated rain light with blinking function
• AX03-R combined function rear lamp with indicator, stop and tail light function
• AX03-DTM FIA rain light for F1, F3, DTM, GTE / GT3, LMP etc. with ASL connector,
activatable blinking function, traceable serial numbers and test protocols,
optional with current control diagnostics (CCD)
• AX03-CC signal lamp with blinking function and LED colour blue, yellow or green
Common to all types are the compact dimensions, the low weight and the very high intensity.
Rear lamps of the AX03 series are used in miscellaneous racing saloon cars, GTs and sports
cars, Le Mans prototypes and formula cars. Since 2006 they proved their outstanding
performance and reliability at various sprint and endurance races as well as with overall
victories at endurance rallys and at the Rally Dakar.
All types (apart DTM) are available with open wires electrical connection (standard). Alter-
natively they can be supplied with 5-pin Deutsch ASL flange connector or wire connector to
customer requirement.
The lamp AX03-DTM has an ASL flange connector as standard und is shipped with full
traceable serial numbers and single part test protocol. Optionally the lamp can be equipped with
an analog diagnosis function (current feedback / current control diagnostics).
As alternative to the AX03 series there are lamps of the AX02 series available, equal in function
but with main dimensions 200 x 30 x 19 mm.
Variants:
Deutsch
ASL-flange connector
7
ENGLISH
open ended wires
combined rear lamp
FIA rain lights
and two-stage lamp
AX03