Troubleshooting - Tangent EVO E10 Betriebsanleitung

Troubleshooting

Symptom
No sound
Red LED not ON
Please note you may hear a tone from the subwoofer when the power are
being switched OFF, this is normal and not a fault.
For your guidance.
Service
For further information or help, please visit our website:
www.tangent-audio.com
Before requesting service, please refer to the trouble-shooting guide above. To
obtain service please contact your local dealer.
Check
Subwoofer connected to the mains lead.
Power is ON.
Your unit is connected to the LINE IN of the subwoofer.
Volume control.
Crossover.
Power switch is in ON position.
Subwoofer fuse.
Mains plug fuse.
14