axing BVS 13-68 Betriebsanleitung Seite 3

Safety advices:
 Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
 Before opening the equipment pull out the power plug or remove the
power supply, otherwise there is danger of electrocution. This is also
valid for cleaning the equipment or working on the connections.
 Only use the mains cable connected to the device. Never replace any
parts or make any modifications on the mains cable. Otherwise there is a
risk of mortal injury for which we cannot be held liable.
 Providing that a serviceable fuse exists, the power cord must be pulled
out before changing the fuse. Defective fuses may only be replaced with
standard compliant fuses that have the same nominal value.
 The equipment may only be operated in dry rooms. In humid rooms or
outdoors there is danger of short-circuit (caution: risk of fire) or electro-
cution.
 Choose the location of installation or mounting so that the power plug
can be reached and pulled out of the socket easily in case of danger.
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. Power feeding cables as well as feeder lines may not
be damaged or clamped by objects of any kind. To prevent damage to
your equipment and to avoid possible peripheral damages, the devices
foreseen for wall mounting may only be installed on a flat surface.
 Choose a location of installation or mounting which complies to the
protection class IP 54.
 Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Devices
that are equipped with heat sinks or ventilation slots must under no
circum-stances be covered or blocked. Also ensure for a generous air
circulation around the equipment. In this way you avoid possible damage
to the equipment as well as a risk of fire caused by overheating. Abso-
lutely avoid that cables come near any source of heat (e.g. radioators,
other electrical devices, chimney, etc.).
State of the art 2018-03-24
Technical improvements, changes in design, printing- and other errors expected.
Technical data:
Article
KDG classification
EMC
Downstream frequency range
Downstream gain
Downstream attenuation: continuously adjustable
Downstream equalization: continuously adjustable
Downstream attenuation interstage: pluggable with
jumpers
Downstream equalization interstage: pluggable with
jumpers
Downstream return loss
Downstream noise figure typ.
1
Max. downstream output level CSO/CTB
Upstream frequency range
Upstream gain
Upstream attenuation: continuously adjustable
Upstream attenuation interstage: pluggable with jumpers
Upstream equalization interstage: pluggable with jumpers
Upstream noise figure
Test port at in-/output
Power supply
Power consumption
Ambient temperature range (acc. to EN 60065)
Equipotential bonding connection
Dimensions (W × H × D) appr.
Protection class
1 CENELEC Raster 41 ch. 60 dB IMA
2 VHF I in forward path is not possible
Herewith AXING AG declares that the marked products comply with the valid
guidelines. You can call up the complete EU declaration of conformity for
download by entering the article in the search field at www.axing.com.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
Manufacturer EWR contact adress
AXING AG Bechler GmbH
Gewerbehaus Moskau Am Rebberg 44
8262 Ramsen 78239 Rielasingen
BVS 13-68 BVS 15-68
C (3.2) C (4.2)
according to EN 50083-2, class A
85...1006 MHz
30 dB 38 dB
0...20 dB
0...18 dB
BVS 13-68 | 15-68
0/6 dB
0/2/4/6 dB
premium-line
≥ 18 dB (-1,5 dB/oct.)
≤ 7 dB
100 dBµV
CATV amplifiers
5...65 MHz 2
30 dB
0...20 dB
0/6 dB Operation instructions
0/3/6/9 dB
≤ 7 dB
-20 ±2,5 dB/-20 ±1,0 dB
100...240 V~/50...60 Hz
5,5 W
-20...+50°C
4 mm 2
200 × 90 × 50 mm
IP 20