Fault Finding - Siemens sf 64660 Gebrauchsanweisung

Pump
Larger remnants of food that have not
been trapped by the filters and have been
left in the water can cause a blockage in
the pump. The water is no longer pumped
out of the dishwasher and it can be seen
covering the filter.
Proceed as follows:
Ladle out as much water as possible.
Remove the filters
Undo the screw in the cover (Torx T 20)
and remove the cover.
Inspect the inside and remove any
obstructions that you find.
Re-insert the cover and screw down.
Re-insert the filters and screw down.
.
26

Fault finding

Resolving minor problems
yourself
Experience has shown that you can
resolve most problems that arise during
normal daily usage yourself, without
having to call out a service engineer. Not
only does this save costs, but it also
means that the appliance is available for
use again that much sooner. The following
list of common occurrences and their
remedies should help you identify the
causes of most problems.
Problems ...
... when the appliance is
switched on
Appliance does not start up
Fault with fuse in mains electricity
supply.
Plug not inserted in wall socket.
Appliance door not closed
properly.
Programme button has not been
pressed.
Water tap not turned on.
Blocked strainer in water intake
hose.
The strainer is situated in the
Aquastop or supply-hose
connection.
en
39