Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Vorderseite
Please observe the fol-
lowing when setting up
the device
1
1
. . . c o n n e c t i n g
y o u r
b u s i n e s s
LANCOM WLC-4025+
1
LANCOM WLC-4100
1
Quick reference guide
4
a
b
Mount the device into
a 19" unit in a server
cabinet.
For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
Do not rest any objects
on top of the device
a
b
Serial
LAN
LCD display (in two lines, rotating)
configuration cable
Use the cable with the
LANCOM 1681V
1
Device name
You can connect the
kiwi-colored connectors
Firmware version
1
Ensure that the
device to a PC with a
to connect one of the in-
Device temperature
1
ventilation slots at
Date and time
configuration cable.
terfaces ETH1 to ETH4 to
1
the back remain
1
CPU load
your PC or a LAN switch.
Memory usage
unobstructed
1
Number of VPN tunnels
1
Data transfer in reception direction
1
1
Data transfer in transmission direction
Number of authenticated access points
1
Number of access points expected (actively
1
configured)
1
Number of new discovered and not yet authenti-
cated access points
Number of expected access points not present
1
SNTP status (when WLAN LED constantly red)
1
1
SCEP status (when WLAN LED constantly red)
c
d
e
a b c d e f g h
a
Power
Off
Green on (permanently) Device operational
Blinking
green/orange
Blinking red
b
Fan
Green on (permanently) CPU temperature OK
Orange on
(permanently)
c
d
e
Optional: uSB
On/off switch
Power connector
Blinking red
You can use the USB
Supply power to the
Use this switch to turn the
interface to connect a
device.
device on or off.
c
COM
compatible USB cellular
Please use the IEC power
Off
modem, a USB printer
cable supplied.
or a USB flash drive for
Green on
device configuration.
(permanently)
Flickering orange
d
WLAN
Red on (permanently)
5
Green on
Unplug the power plug from the power socket
(permanently)
to ensure that the device is completely sepa-
Blinking red
rated from the power supply!
Hardware
Power supply
Internal power supply unit (110-230 V, 50-60 Hz)
Power consumption
30 W
Environment
Temperature range 5 – 40 °C; humidity 0-95%; non-condensing
Housing
Robust metal housing, 19" 1U with removable mounting brackets, network connectors on the front
Number of fans
1
interfaces
i
ETH
4 individual ports for 10/100/1000-Mbps Ethernet, Ethernet ports can be electrically disabled in the LCOS
configuration.
Each Ethernet port can be freely configured (LAN, WAN, monitor port, off). LAN ports operate in switch
mode or isolated. Additionally, external DSL modems or termination routers can be operated at the WAN
port together with policy-based routing.
USB
USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COM-port
servers), USB data media (FAT file system), or supported UMTS USB modems; bi-directional data transfer
i
ETH (one green and one yellow LED each)
available.
Config (Com)
Serial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional
Device switched off
Green off
No networking device attached
connection of analog/GPRS modems. Supports the internal COM-port server.
Green on
Connection to network device
WAN protocols
Configuration password not set. Without
(permanently)
operational, no data traffic
Ethernet
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP-1, RIP-2,
a password the configuration data in the
Flickering green
Data transmission
VLAN, IP
device is unprotected.
Yellow off
1000 Mbps
Declaration of conformity
Charge or time limit reached
CE
EN 55024, EN 60950
Yellow on
10/100 Mbps
(permanently)
Package content
Manual
Quick Reference Guide (DE/EN), Installation Guide (DE/EN/FR/ES/IT/PT/NL)
h
VPN
CD/DVD
Data medium with firmware, management software (LANconfig, LANmonitor) and documentation
CPU temperature > 55°
Off
No VPN connection active
Cable
Ethernet cable, 3m (kiwi-colored connectors)
Green on
VPN connection active
Cable
Serial configuration cable, 1.5 m
Hardware failure of the fan or CPU tem-
(permanently)
Cable
IEC power cord
perature > 60°; additional acoustic signal
Blinking green
Establishing VPN connections
g
CA
No session logged on for the serial con-
Off
Internal CA switched off
figuration interface
Green on
Internal CA switched on and ready
Serial configuration session logged on
(permanently)
Red on
Internal CA switched on; an error
Data transmission during the configuration
(permanently)
has occurred
session
Orange on
CA switched on and ready; request
(permanently)
pending
f
The LANCOM WLAN controller is not yet
Lost APs
operational; one of the following elements
Blinking red
At least one expected access point
is missing:
has not been found.
Root certificate
1
Device certificate
1
e
New APs
1
Current time
Random number for the DTLS encryption
1
Blinking orange
At least one new access point for
At least one active access point connected
authentication has been found.
and authenticated.
The device is operational but not con-
nected to an active access point.
Werbung
