Inhaltsverzeichnis
Werbung
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.
Setting the WCS-222 speaker system:
Important: For your safety, set up the system before plugging it into a
power source.
1. Before attaching the cables to the subwoofer, position the two front
satellite speakers on either side of your monitor. Depending on where you
place your speakers, adjust them to direct the sound toward you. For best
sound quality, place the subwoofer on the floor beneath your desk. Be sure
to maintain at least 6 inches of spacing around the subwoofer to allow for
adequate ventilation.
2.Connect the satellite speakers to the subwoofer as shown on the
previous page.
3. A).If you have a PC:
Plug the green audio input cable from the right speaker into the
speaker output on your PC.
B).If you have a video game console (PlayStation (R), PlayStation(R)
2, Xbox(TM), or GameCube(R)):
Requires the Console Gaming Y-adapter(sold separately). Connect
the red and white RCA cable that came with you console gaming system to
the matching red and white RCA jacks on the Console.
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
WCS-222 MULTIMEDIA SPEAKER 2.1 SYSTEM
http://www.gembird.eu
5
Werbung
Inhaltsverzeichnis
