5-Tone Selective Calling - Team Electronic TeCom-IPZ5 PMR Bedienungsanleitung

English
NAME 021 - channel name
ON / OFF;
the via software programmed channel name is displayed
ROGER 022 - Roger Ton
ROGON (On) / ROGOFF (Off)
activates the roger beep
Note:
With the optional software T-UP25, the aforementioned and further functions and
settings, e.g. battery saving, roger tone, busy channel lockout, compander, etc.
are programmable.
For the commercial versions, the tx power is also programmable with the accor-
ding software.
24

5-TONE SELECTIVE CALLING

The TeCom-IPZ5 contains a 5-tone selective calling function with single and group
calling function, which parameter are to be set via software T-UP25.
General:
Each handheld transceiver can be programmed with one 5-tone selective decode
and nine encodes (1 per channel).
Once 5-tone selective calling is activated, the encode is sent off by pressing the ac-
cording multifunction key (10) or (11), which has to be programmed with the 5-tone
function. If the transmitted encode matches the programmed decode of the radio, the
receiver displays the ID code and performs according to the programming, e.g. spea-
ker unmutes, bell rings, an automatic confirmation is sent, etc.
For sending a 5-tone selective call please follow these steps:
1. Push the according multi-functional key (10) or (11) that is programmed with
Optional Signal to sent off the 5-tone call.
2. Push the PTT key (9).
CONNECTION
The TeCom-IPZ5 is equipped with a Kenwood-compatible
accessory connection (3.5 / 2.5 mm - stereo / stereo) that
can also be used for the data transfer cable to connect to
the software T-UP25.
For further accessories please check the actual TEAM
product range or web site.
English
25