Installation; Cleaning And Maintenance - EuroLite 60004550 Bedienungsanleitung

INSTALLATION

Please consider the
installation! The installation must only be carried out by an authorized dealer!
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the loads. If you lack these qualifications, do not attempt the installation yourself, but
instead use a professional structural rigger. Improper installation can result in bodily injury and.or damage to
property.
The pole has to be installed out of the reach of people.
Installation
Caution: The loads have to be installed in a balanced way.
Caution: The carrying capacity of the pole must never exceed 35 kg!
Installation of speakers with flange connector
Carefully install the pole onto a speaker box having an appropriate flange connector.
Carefully install a second speaker box (max. 35 kg) with the appropriate flange connector on the top of the
pole.
Before taking into operation for the first time, the installation has to be approved by an expert!

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) The standing stability of the pole has to be checked.
2) All carrying parts have to be inspected on damages or material fatigue.
DANGER TO LIFE!
DIN 15560-27 and the respective national norms during the
DANGER TO LIFE!
9/10 60004550_V_1_1.DOC