Litecraft BlindX.4 Bedienungsanleitung Seite 17

display function
DMX Channel Channel
<****> <****>
**** =
<1 Ch>
<3 Ch>
<4 Ch>
<9 Ch>
Master/Slave Master/Slave
<******> <******>
****** =
<Master>
<Slave>
Fan Mode Fan Mode
<****> <****>
**** =
<Auto>
<High>
Temperature Temperature
<***> LED 1 <***>
*** = fixture­temperature LED1
LED 2 <***>
*** = fixture­temperature LED2
LED 3 <***>
*** = fixture­temperature LED3
LED 4 <***>
*** = fixture­temperature LED4
LED Frequency LED Frequency
<****> <****>
**** =
600 Hz
1.200 Hz
2.000 Hz
4.000 Hz
25 KHz
setting DMX­channel mode
(description of modes in next chart)
(default setting = 9 Ch)
setting working mode
(Master: control without
external controller)
(Slave: control with
external controller)
(default setting = Slave)
setting fan control
Auto: automatic temperature control
High: max. power
(default setting = Auto)
display the inside fixture­temperature
per LED modul
setting PWM frequency to match on
cameras
(default setting = 1.200 Hz)
17