Telephoning; Quickdial - AUDIOLINE 68 PLUS Bedienungsanleitung

5 Telephoning

Taking a call
{ì}, è or ™
Ending a call
™or é
Making a call
è or ™
ë
Redialling
Your telephone stores the last phone number dialled.
è or ™, £
One−touch dialling
You can use the one−touch dialling buttons M1, M2 and M3 for normal
direct dialling or as memory locations for the automatic emergency call
function. Be sure to store phone numbers for one−touch dialling first;
. Page 28.
è or ™
^, _ or `

Quickdial

It is possible to store 10 phone numbers so that they are dialled simply by
pressing three buttons (quick dialling).
Programming quickdial buttons
è
”
ë, ”
0
é
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Take the call
End the call
Lift the receiver or activate handsfree
Enter the phone number
(max. 32 digits)
Dial the last number dialled
Lift the receiver or activate handsfree
Press the one−touch dialling button
required
Lift the receiver
Press the memory button
Enter the phone number
(max. 16 digits) and confirm it
Enter the required memory location
number (e.g. in this case for memory
location 0)
Replace the receiver on−hook
Dialling using quickdial buttons
è or ™
0
The phone number stored is automatically dialled.
The phone numbers assigned to the quick−dial buttons cannot be
deleted. The existing entries are overwritten when a new number
is stored.
Increasing the receiver volume to +40 dB
The receiver volume can be increased to +40 dB by pressing the left−hand
volume button.
Ý
Setting the receiver volume
You can adjust the receiver volume using a rotary knob when the +40 dB
amplification is activated.
Tone control
You can adjust the tone produced in the receiver using a slide control on
the right−hand side of the housing.
The tone control only works when the +40 dB amplification is
activated.
Ringing volume
You can adjust the ringing volume using a slide control on the right−hand
side of the housing.
Telephoning
Lift the receiver or activate handsfree
Press the quickdial button
Enter the required memory location
number (e.g. in this case for memory
location 0)
Increase the receiver volume
Adjust the volume with the knob
Adjust the tone using the slide control
Adjust the volume using the slide
control
25