Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User's manual
HDD Docking Station
USB 3.0 black
Art.No. 95729
INTRODUCTION:
The SATA Docking Station enables you to connect a 2.5" or 3.5" SATA hard disk to your PC.
Data transfer is possible by using the 3.0 USB port.
SCOPE OF DELIVERY:
1x SATA Docking Station
1x power supply
1x USB cable
1x user's manual
(Hard disk is not included!)
SYSTEM REQUIREMENTS:
• PC with Windows 2000, XP, VISTA, or 7 operating system
• free USB 2.0 port
CONNECTIONS:
1. ON/OFF Switch
2. Micro-USB port
3. 12 V DC connection
INITIATION:
1.
Connect the Docking Station to a 230 V AC mains socket by using the included power supply.
2.
Connect the Docking Station to a USB 3.0 port of your PC.
3.
Switch on the Docking Station. (ON/OFF Switch)
4.
The PC installs the driver software automatically after connecting.
Installation from CD-ROM is not necessary.
5.
Insert a 2.5" or 3.5" SATA hard disk into the slot from above in a way, the hard disk socket is proper
connected to the port.
Note! Dependent on PC and operating system it could last some seconds, before Windows recognizes the
hard disk. Wait some seconds, above all, before first connecting.
1
1/2
2
3
Werbung
