Learn More - Kruger&Matz KM1085 Bedienungsanleitung

Owner's manual
enaBling Wi-fi
a. Select „All settings" in the Info Center.
b. Tap „Network & Internet" in the settings menu.
c. Tap „Wi-Fi" on the left.
d. Move the slider for Wi-Fi from „Off" to „On".
e. Tap the network that you wish to connect to.
f. Tap „Connect". Enter the network key (password) if necessary. The
device connects to the selected network.
cOnServing energy
• Deactivate the Wi-Fi function when it is not in use.
• Keep the device connected to power mains only until it is fully charged.
• Reduce the display brightness in the unit settings.
• Switch to standby mode/turn it off when the device is not in use.

learn mOre

For more information on this product, go to www.krugermatz.com.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked
Questions section.
Please note: below illustrations and descriptions concerning operating
system are for reference only, and may vary from actual software on your
device!
13