Intercom Function; Range; Registration - Amplicomms Watch & Care V100 Bedienungsanleitung

Switch off: press the button briefly.

Intercom function

Press and hold the button.
This icon appears in the display.
Speak into the microphone to talk with the person near the other
unit. When the talking button is pressed, any playing of lullabies will
be aborted.

Range

When the distance between the transmitter and receiver is too far,
the message "Out of Range" appears in the display and you hear a
beep. Move the receiver nearer to the transmitter. If necessary, opti-
mum range can be achieved if both the Baby unit and Parent unit
antennas are extended vertically.

Registration

In delivery state the transmitter is pre−registered at the receiver. If necessa-
ry or if a another camera is added to the system, registration can also be
completed manually:
1 Switch the transmitter off (switch set to OFF). Remove the batteries of
the receiver for a few seconds if necessary.
2 Switch the receiver on.
3 Press the menu key repeatedly
4 Use the
5 Press and hold down the
appears in the display.
buttons to select the desired camera [C1] ... [C4].
button for approx. 2 seconds.
Helpline UK 0844 800 6503
(See page 42 for costs and hours of operation)
O
PERATING THE
until [C1] appears in the display.
R
ECEIVER
37