Punching Instructions - Olympia SB 950 Bedienungsanleitung

Punching Instructions

Attention: The symbols on the binding machine specify the maximum
capacity of the unit. Do not exceed these limits.
Note: Test-run the machine before punching properly.
1. To check the mechanism, start with scrap paper you insert into the
front slot.
2. Insert the paper as far as it will go in, making sure that it also
touches the adjustable stop on the left.
3. Smoothly push the lever all the way down.
4. Release the lever to move back up and remove the sheets.
5. Check if all holes are properly on the paper or if an incomplete hole
has been punched into the edge. If so, adjust the paper stop on the
left and use another piece of scrap paper to check results.
6. To bind more than 8 sheets of paper, repeat the process until you
have punched all of the sheets.
7. Separately punch the transparent cover sheet and the rear card-
board cover.
8 sheets of comb binding capacity
The punching capacity of the binder is 8 sheets. A
maximum of 8 sheets of copying paper (80gsm)
can be punched at a time.
14