Onkyo HTP-338 Kurzanleitung

5.1ch Home Theater Speaker Package
Front speaker (SKF-338)
(White) (Red)
Front speakers *1
Speaker cables 3.5 m
(11 ft.)
*1 For magnetic shielding.
*2
Non-magnetic shielding.
*3 Configuration of the rubber stoppers may be different from the figure, such as being
2 sheets instead of 1 sheet, but the total number will be same.
Keyhole slot
Speaker terminals
SKF-338
SKR-338
Wall Mounting
To mount the front/surround speakers vertically, use the
keyhole slot shown to hang each speaker on a screw that's
securely screwed into the wall.
Keyhole slot for
wall mounting
Thick rubber
stoppers
Using the Rubber Stoppers for a More Stable Platform
We recommend using the supplied rubber stoppers to
achieve the best possible sound from your speakers. The
rubber stoppers prevent the speakers from moving, provid-
ing a more stable platform. Use thick stoppers for the cen-
ter speaker, and thin stoppers for the other speakers.
Enjoying Home Theater
The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home — just like being in
a movie theater or concert hall.
Front left and right speakers (SKF-338)
They should be positioned facing the listener at about ear level,
and equally spaced from the TV. Angle them inward slightly so
as to create a triangle, with the listener at the apex.
Center speaker (SKC-338)
Position it close to your TV (preferably
on top) facing forward at about ear
level, or at the same height as the
front left and right speakers.
Subwoofer (SKW-338)
The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects)
channel. The volume and quality of the bass output from your subwoofer will
depend on its position, the shape of your listening room, and your listening posi-
tion. In general, a good bass sound can be obtained by installing the subwoofer
in a front corner, or at one-third the way along the front wall, as shown.
Connecting the Speakers
Front right
speaker
Red
Purple
Subwoofer
Surround right
speaker
E HTP-338
n
Surround speaker (SKR-338)
(Blue)
Surround speakers *2
Speaker cables 8.0 m
16 thin rubber stoppers
Speaker terminals
SKC-338
Keyhole slots
To mount the center speaker horizontally, use the two key-
hole slots shown to hang each speaker on two screws that
are securely screwed into the wall.
Keyhole slots for wall mounting
Thick rubber
stoppers
183 mm (7-3/16")
Thin rubber stoppers
Bottom of the
SKF-338
Surround left and right speakers (SKR-338)
Position them at the sides of the listener, or
slightly behind, about 60 to 100 cm (2 to 3 feet)
above ear level. Ideally they should be equally
spaced from the listener.
1/3 of wall
position
Front left
speaker
Center speaker
Green
White
Speaker Connection
Precautions
Read the following before connecting your
speakers:
• Turn off your receiver before making any
connections.
• Pay close attention to speaker
Blue
wiring polarity. Connect posi-
Gray
tive (+) terminals to only pos-
itive (+) terminals, and
negative (–) terminals to only negative (–)
terminals. If the speakers are wired incor-
Surround left
rectly, the sound will be out of phase and
speaker
will sound unnatural.
• Be careful not to short the positive and
negative wires. Doing so may damage
your amp.
Center speaker (SKC-338)
(Gray)
Center speaker *1
(26 ft.)
*3 12 thick rubber stoppers
Caution
• The front grilles are not designed to be removed so do not
attempt to remove them forcibly, as this will damage
them.
Caution
• A mounting screw's ability to support a
speaker depends on how well it's
anchored to the wall. If you have hol-
low walls, screw each mounting screw
into a stud. If there are no studs, or the
walls are solid, use suitable wall
anchors. Use screws with a head diame-
ter of 9 mm (5/16") or less and a shank diameter of 4 mm
(1/8") or less. With hollow walls, use a cable/pipe detec-
tor to check for any power cables or water pipes before
making any holes.
• Leave a gap of between 5 mm (3/16") and 10 mm
(7/16") between the wall and the base of the screw head,
as shown. (We recommend that you consult a home instal-
lation professional.)
Bottom of the
SKR-338
Bottom of the
SKC-338
Specifications
■
Passive Subwoofer (SKW-338)
Type
Impedance
Maximum output power
Sensitivity
Frequency response
Cabinet capacity
Dimensions (W × H × D)
Weight
Drivers unit
Terminal
Power consumption
■
Front Speakers (SKF-338)
Type
Impedance
Maximum input power
Sensitivity
Frequency response
Corner
Cabinet capacity
position
Dimensions (W × H × D)
Weight
Drivers unit
Terminal
Keyhole slot
Grille
Other
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH (UK BRANCH)
The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700
ONKYO CHINA LIMITED
Unit 1 & 12, 9/F, Tower 1, Ever Gain Plaza, 88, Container Port Road, Kwai Chung,
N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
SN 29400401
(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.
Subwoofer (SKW-338)
(Green)
Speaker cable 3.0 m
(10 ft.)
Subwoofer
*2 Non-magnetic shielding.
*3
Caution
• The front grilles are not designed to be removed so do not attempt
to remove them forcibly, as this will damage them.
Using the Floor Pads for Subwoofer
Wall If the subwoofer is placed on a hard
floor (wood, vinyl, tile, etc.) and
playback is very loud, the sub-
woofer's feet may damage the floor-
ing. To prevent this, place the
5 to 10 mm
supplied pads underneath the sub-
(3/16" to 7/16")
woofer's feet. The pads also provide
a stable base for the subwoofer.
Thick rubber stoppers
50 mm
(1-15/16")
12 mm (1/2")
■
Center Speaker (SKC-338)
Bass-reflex type Passive subwoofer Type
6 Ω
Impedance
130 W Maximum input power
82 dB/W/m Sensitivity
30 Hz to 150 Hz Frequency response
24 L (0.8 cubic feet) Cabinet capacity
211 mm × 425 mm × 381 mm Dimensions (W × H × D)
(8-5/16" × 16-3/4" × 15")
(incl. projection)
5.5 kg (12.1 lbs.) Weight
16 cm (6-5/16") Cone × 1
Drivers unit
Spring type color coded Terminal
50 W Keyhole slot
Grille
Other
■
Full Range Bass-reflex Surround Speakers (SKR-338)
6 Ω
120 W Type
82 dB/W/m Impedance
80 Hz to 20 kHz Maximum input power
1.0 L (0.036 cubic feet) Sensitivity
101 mm × 161 mm × 111 mm Frequency response
(4" × 6-5/16" × 4-3/8")
Cabinet capacity
(incl. grille and projection)
Dimensions (W × H × D)
0.8 kg (1.76 lbs.)
8 cm (3-1/4") Cone × 1
Spring type color coded Weight
1 Drivers unit
Fixed Terminal
Magnetic shielding Keyhole slot
Grille
Specifications and appearance are subject to change without
prior notice.
(Purple)
4 floor pads
Speaker cable 3.0 m
(10 ft.)
*2
Speaker terminals
Pad
Full Range Bass-reflex
6 Ω
120 W
82 dB/W/m
80 Hz to 20 kHz
1.4 L (0.05 cubic feet)
230 mm × 102 mm × 113 mm
(9-1/16" × 4" × 4-7/16")
(incl. grille and projection)
0.9 kg (2.0 lbs.)
8 cm (3-1/4") Cone × 1
Spring type color coded
2
Fixed
Magnetic shielding
Full Range Bass-reflex
6 Ω
120 W
82 dB/W/m
80 Hz to 20 kHz
1.0 L (0.036 cubic feet)
101 mm × 161 mm × 111 mm
(4" × 6-5/16" × 4-3/8")
(incl. grille and projection)
0.7 kg (1.3 lbs.)
8 cm (3-1/4") Cone × 1
Spring type color coded
1
Fixed
Y1001-1
* 2 9 4 0 0 4 0 1 *