Chapter 4 Remarks; General Information; Reset To Default Settings - Roline Rdof2-1W Schnellstart

13
Figure 2-6 Adjust the Security Level
Chapter 4
Remarks

4-1 General information

The network camera supports only PoE devices (power over the network cable), supporting
the standards IEEE802.3af.
The network camera has a barrel connector with 5, 5 mm diameter for an optional 12V DC /
1 .5A power supply.

4-2 Reset to default settings

After the powering on of the camera, pressing and holding the RESET button for about 10
seconds can reset all the parameters to the default settings.