Led Status - Renkforce EW-7476RPC Schnellinstallationsanleitung

3. LED Status

All LEDs are disabled in green mode. The best signal strength is 60 – 80%
since above 80% is likely too close to your router for the extender to be
effective.
LED Color
Signal
Blue
5GHz
Signal
Blue
2.4GHz
Cross
Green
Band
Power
Green
WPS
Green
LAN
Green
Status
Excellent location.
On
Signal strength: 60 – 80%
Slow Good location.
Flashing Signal strength: 40 – 60% & 80 - 100%
Quick Poor location.
Flashing Signal strength: Below 40%
Off No signal detected.
Excellent location.
On
Signal strength: 60 – 80%
Slow Good location.
Flashing Signal strength: 40 – 60% & 80 - 100%
Quick Poor location.
Flashing Signal strength: Below 40%
Off No signal detected.
On Cross band enabled.
Off Cross band disabled.
On Extender is on.
Resetting to factory default settings, or system is
Flashing
booting up.
Off Extender is off.
WPS connection established (LED will remain on for 30
On
seconds to indicate a successful connection).
Flashing WPS in progress (waiting for another WPS device).
Off No WPS in progress.
On LAN port connected.
Flashing LAN activity (transferring or receiving data).
Off LAN port not connected.
Description
10