Safety Instructions; Operation - VOLTCRAFT NPS-90A Bedienungsanleitung

OPERATING INSTRUCTIONS
NPS-90A LCD NOTEBOOK POWER ADAPTER 90 W
ITEM NO.: 51 50 03
INTENDED USE
This product is designed to supply electric devices such as notebooks or netbooks
with power. You can power your notebook or a USB device from a standard wall
outlet. The output voltage of the product is automatically controlled by the output
plug selected. The connected load's current consumption must not exceed the
maximum output rating of the product. Power is supplied via a standard mains socket
(100 – 240 V/AC, 50/60 Hz). The product should only be used in dry indoor areas.
The product features both short-circuit and overload protection.
For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above, the
product may be damaged. In addition, improper use can cause hazards such as
short circuiting, fire, electric shock etc. Read the instructions carefully and keep
them. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
DELIVERY CONTENT
• Power adapter
• Power cord
• 11 output plugs
• Operating instructions

SAFETY INSTRUCTIONS

Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Sufficient ventilation is essential when operating the product. Do not cover
the product. Never place the product on a table cloth or on a carpet. Place
it on a hard, flame resistant base.
• The product should not be used immediately after it has been brought from
an area of cold temperature to an area of warm temperature. Condensed
water might destroy the product. Wait until the product adapts to the new
ambient temperature before use.
• Make sure that the output of the power adapter is not short-circuited.
• Never pour liquids over electrical appliances and never leave objects filled
with liquids (e.g. vases) on it or in the vicinity. There is a high risk of fire or
VERSION 08/12
life-threatening electric shock.
• Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• The plug must be pulled out of the socket under the following conditions:
- before cleaning the product
- during a thunder storm
- if the product is not being used over a long period.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection
of the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which
are not covered by these operating instructions, please do not hesitate to contact our
technical support or another qualified specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 180/586 582 7.

OPERATION

Disconnect the power adapter from the mains socket before replacing
the output plug.
The power adapter's output voltage must match the input voltage of
the electric consumer.
The output voltage is automatically controlled by the output plug selected.
The adaptor offers a second output power through the USB power ports.
The USB power ports support 2.1 A maximum current consumption.
At any given time, make sure the connected USB devices do not
exceed the maximum current consumption.
1. Select an output plug that matches the input socket and input voltage of the
electric consumer (see table).
2. Connect the output plug to the connector at the end of the output cable. Voltage
reversal of the output plug is not possible for security reasons. The inner contact
is positive (+), the outer negative (–).
3. Connect the output plug to the switched-off consumer.
4. Connect the power cord's plug with the matching socket of the power adapter.
5. Connect the mains plug to a standard mains socket (100 – 240 V/AC, 50/60 Hz).
The LCD on the top of the power adapter shows the current output voltage.
6. Put the power adapter onto a solid, flame-retardant surface and ensure that the
power adapter is sufficiently ventilated.
7. Now switch the connected consumer on. If it does not function properly, switch it
off immediately and disconnect it from the power adapter.
8. To power / charge a USB device, insert the device into the USB power socket.
9. Remove the power adapter from the mains when it is no longer in use.
CLEANING
• When cleaning, the power adapter must be disconnected from mains socket and
electrical loads.
• Only use dry and soft cloth to clear the housing of the power adapter.
• Do not use abrasive or solvents.