Declaration Of Conformity; Technical Data - HPV 90501 Gebrauchsanweisung

INSTRUCTION MANUAL
Thank you for choosing our product! In order to make the most of your equipment, please read the
following carefully.

Declaration of conformity

The equipment complies with EEC Directives 83/336 (electromagnetic compatibility) and 73/23 (low
voltage) for the professional only.
The equipment complies with Standards EN 609741.
Description
The TIG 180 ACDC machine is a single phase Inverter welder, portable of 1 kg, air cooled, for TIG
welding with AC (Alternative current) and DC (Direct current) as well as for electrode MMA welding with
direct current (DC). In TIG AC mode, the device allows to weld aluminium and its alloys; with TIG DC it
allows to weld the majority of metals and with MMA all types of electrodes: rutile, basic, stainless steel,
cast iron and aluminium. It disposes also a position AC easy which facilitates the TIG AC settings.

Technical data

Welding current, electrodes
Welding current, TIG
Includes TIG burner, manometer, burner accessories, electrode holder, and ground cable
Meaning of indicators and symbols
A Amperes
V Volts
Hz Hertz
Tungsten Inert gas (Tig).
Metal Manual arc (MMA)
Unit can be used in environment with
increased hazard of electric shock
The welding current is direct in MMA
and Tig DC.
IP Degree of protection
U o Open voltage
Single phase electrical feeding 50 or
60Hz
The welding current is alternative in Tig
AC.
The electrical arc produces dangerous
sparks for eyes and skin (protect
yourself)
TSL TIG starting systemTouch / Switch / Lift
HF TIG starting system by High Frequency.
I1max Rated maximum supply current
ENGLISH
160 A Voltage
180 A Fuse
I1eff
U 1
EN 60974-1
AC easy
230 volt
Supply current
Voltage mains
The device complies with
Standard EN60974-1 relating to
welding machines.
Gas exit for the TIG torch
connexion.
Single phase converter
transformer-rectifier
X: Duty cycle at 30%, 60% and
100 %
I : Corresponding currents
2
U : Conventional load voltage
2
Attention, the welding can
provoke a fire or an explosion.
The machine complies with the
European Standards.
Study carefully this instruction
manual
TIG AC position does not need the
frequency setting.
16 A
31