Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Bluetooth
VR Gamepad
®
Item no. 1587099
Intended use
Use the gamepad to control your smartphone or tablet. Use it in combination with VR goggles.
Communication between gamepad and mobile device happens via Bluetooth
iOS operating systems are supported.
For safety and approval reasons, you may not convert and/or alter the product. If you use
the product for purposes other than those described above, the product may be damaged.
Furthermore, improper use can cause risks such as short-circuits, fire, etc. Please read the
operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Bluetooth
is a registered trademark of Bluetooth SIG, Inc. worldwide.
®
Package Contents
• Gamepad
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Safety Instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper handling of
the product. Furthermore, in such cases, the warranty/guarantee will be null
and void.
a) General
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packing materials unattended. It may become a dangerous plaything for
children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations, high
humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• Please handle the product carefully. It can be damaged by impact, blows, or by being
dropped, even from a low height.
• Observe the safety instructions and operating instructions of other devices the product is
connected to.
• If you have any questions that are not answered in these operating instructions, please
contact our technical customer service or other professionals.
b) Batteries
• Please observe the correct polarity when placing batteries in the unit.
• If you are not going to use the device for a while, remove the batteries to prevent damage
from leaking. Leaking or damaged batteries can cause acid burns upon contact with the skin.
Thus, you should wear protective gloves when handling damaged batteries.
• Keep the batteries out of the reach of children. Do not leave batteries lying around, as they
may be swallowed by children or pets.
• All batteries should be replaced at the same time. Mixing old and new batteries in the device
can lead to battery leakage and device damage.
• Do not dismantle batteries, do not short-circuit them and do not throw them into fire. Never
charge conventional, non-rechargeable batteries. There is a danger of explosion!
Inserting and replacing batteries
• In the case that batteries are supplied and already inserted, remove the insulation strip to
activate the batteries.
• Do not use rechargeable batteries.
• Turn the gamepad over and push the battery compartment cover open against the direction
of the arrow. Insert two AAA batteries into the recessions. The negative pole must face the
spring. Replace the battery compartment cover.
• When the batteries are depleted the control light flashes fast. Replace the batteries.
Switches and keys
JOYSTICK
SELECT-2
. Android and
®
Turning on and off
For Android MTK, see chapter "Android MTK".
• Press and hold the START key for 2 seconds to turn the gamepad on. The control light L
lights up red.
- The control light flashes fast and red if no mobile device is paired with the gamepad.
- If no mobile device is paired with the gamepad it automatically turns off after 5 minutes.
- If a mobile device is paired with the gamepad and no input is registered over a 30 minute
period it automatically turns off.
• Press and hold the START key for 5 seconds to turn the gamepad off. The control light goes
out.
Pairing
1. Activate Bluetooth
2. Turn on the gamepad and wait until the control light flashes fast and red.
3. On your mobile device look for the Bluetooth
Once gamepad and mobile device are paired the control light flashes red once every 5
seconds.
- After you turn on mobile device and gamepad again they are automatically paired.
There can be differences between mobile manufacturers in regards to support of this
functionality.
• If you wish to pair another mobile device turn the gamepad off. Hold down (approx. 8
seconds) the START key until the control light flashes fast and red. Follow the outlined steps
in this chapter to pair the new device.
Mouse
For Android only
Key
M
SELECT-1
SELECT-2
JOYSTICK
Keyboard
In case that the virtual keyboard does not function:
• Android: Install the Android keyboard available on Google Play.
• iOS: Press the M key.
KEY Mode
Flip the GAME/KEY switch into the KEY position. The following sections are functions of the
KEY Mode. Operate the gamepad with one hand.
a) Music and video playback
Open the music player on your mobile device. After you start the playback use the gamepad to
control it: pause, selection of titles, ...
There are differences between Android and iOS. Key B, for example, is used under
Android to take selfies but mutes sound under iOS.
Observe the key combinations:
Key
JOYSTICK
Esc
M
SELECT-1
Esc
M
Y
L
SELECT-1
X
GAME/KEY
START
on your mobile device (smartphone, tablet).
®
device with name "B01.." and start the pairing.
®
Function
• Turn mouse on or off
• Control light lights up green when mouse is activated
Select
Control position of mouse cursor
Function
Key
Y
up/down, left/right,
forward/backward
B
escape/back
activate/deactivate mouse A
X
play/pause
B
A
Function
open menu
mute sound/control shutter
volume–
volume+
Werbung
