Werbung
MAX! Window Sensor
•
The MAX! window sensor consists of two elements: a smaller
magnet and a larger electronic unit.
•
Please insert the batteries. The electronic unit must be
mounted on the frame using adhesive strips as shown in the
adjacent figure (1). Attention! Please do not yet place the cap!
•
Mount the magnet on the window.
•
Click on ‚New device' in the software.
•
Press and hold down the teach-in button of the MAX! Window
Sensor (2).
The device will appear in the
software.
•
In the software, please click
‚Continue' to assign a name
and to allocate the device to a
room.
•
Now place the cap to the elec-
tronic unit.
•
Please proceed in the same
way for all window sensors in
this room.
(2)
11
Werbung
