Led Display; Troubleshooting; Safety Warnings - Inakustik PREMIUM BLUETOOTH RECEIVER Bedienungsanleitung

USER MANUAL
Out of range or lost signal:
1.
2.
3.
4.0 LED – DISPLAY

5.0 TROUBLESHOOTING

You can solve your problems from this section
No music out from my stereo speaker:
 Make sure the BTR-1500 is powered.
 Make sure an audio cable or an Optical cable is correctly and firmly connected to BTR-1500
 Make sure that the audio source selection of your amplifier is correct with your audio connection
(analogue audio or TOSLINK)
 Make sure the volume of the stereo is set to a comfortable listening level
 Make sure you are within range.
 Make sure the Bluetooth function is opened on your device.
 Make sure you are playing the music from your device.

6.0 SAFETY WARNINGS

08
 The receiver requires full connection and both hands to install.
 Do not use the receiver near water(for example, a bath tub, wash bowl, kitchen sink, laundry tub,
wet basement, swimming pool, or other areas located near water).
 Only clean with dry cloth.
 Unplug the eceiver before cleaning.
 Install the receiver far away from heat sources.
 Use only suitable accessories.
 Unplug the receiver when unused for long time.
When the paired phone or device away from receiver (33 feet) or there is something blocking
the Bluetooth signal. The LED light will go off, it means the connection between device and
receiver is lost. To avoid a lost connection:
Move the music device back into range ( within 33 feet), and make sure there's a clear line of
sight and there are no obstructions between receiver and device.
Within 15 seconds, the connection will automatically be reestablished and LED will turn on.
If the connection is lost for more than 15 seconds, you need to reconnect the device and
receiver again. Please follow the "Reconnect Your Device" section.