Hach TENSETTE plus BBP087 Kurzanleitung

Quick Reference Guide
Figure 1 TenSette plus BBP087
1 Battery 7 Function
indicator
2 Volume 8 Speed in / out
indicator
3 Right Selection 9 Speed indicator
Key
4 Scroll Key 10 Charger Socket
5 Tip Ejector 11 Trigger and
Lever finger rest
adjustable
6 Left Selection 12 Trigger
Key
© Hach Company, 2007. All Rights Reserved.
TenSette plus BBP087
Important Note: This Guide is only valid in conjunction with the complete manual DOC022.98.00744.
System Start Up
1. Connect the plug of the charger to the socket on the back of the pipette
charger to an AC wall socket.
Note: You can use the pipette while the charger is connected.
2. Press the trigger (Figure 1, item 12) to turn on the pipette.
3. After 30 minutes without usage the pipette switches to the sleep mode. Press
to switch off the pipette.
POWER OFF
Operation
Setting of the pipetting volume
1. Choose the function (
PIPETTE
2. Select the volume by pressing the scroll key
Setting of the pipetting speed (optional)
1. Select (default , slow –
SPEED 6 1
2. Select the speed-in with the scroll key
the scroll key and accept with
Pipetting
1. Dip the tip (Cat. No. BBP068) under the surface of the liquid. Press the trigger
drawn in to the tip.
2. To deliver the liquid press the trigger.
3. Change the tip and continue pipetting.
Note: For the convenient usage of HACH LANGE cuvette tests, the nine most frequently used volumes are pre-programmed
→ →
(MENU PROGRAM PROG 1-9).
HACH Company
PO Box 389 • Loveland CO 80539
Phone: 970/669-3050 • Fax: 970/669-2932
Website: www.hach.com
MENU → PIPETTE ).
(Figure 1, item 4) up or down. Accept the volume with
fast). The speed-in starts to blink.
9
(Figure 1, item 4) and accept with
.
OK
DOC012.98.00788
(Figure 1, item 10). Connect the
MENU → OPTIONS → POWER →
.
OK
. Then select the speed-out with
OK
(Figure 1, item 12). The liquid is
HACH LANGE GMBH
Willstätterstraße 11 • D-40549 Düsseldorf • Germany
Tel. +49 (0)211 52 88-0 • Fax +49 (0)211 52 88-143
www.hach-lange.com
Edition 1, January 2007 ck/sk