Digital Blue Disney Pix Click Handbuch

Power Button
LED Status
Snapshot
Button

Camera Components:
Power Button – Press the Power button to turn the camera
on and off.
Snapshot Button – Use the Snapshot button to take digital
images.
LED Status – Flashes to let you know when you have
successfully taken a picture.
Flash – Use the Flash in low light situations or to
highlight the subject of your picture.

Kamerakomponenten:
Ein/Aus-Taste - Drücken Sie die Ein/Aus-Taste, um
die Kamera ein- oder auszus chalten.
Auslöser - Um Bilder aufzunehmen.
Status-LED - Blinkt, wenn ein Bild aufgenommen
wurde.
Blitz - Benutzen Sie den Blitz bei Dunkel
heit oder zur Betonung des Haupt
motivs Ihres Bildes.

Composants de l'Appareil :
Touche d'Alimentation – Appuyez sur la touche d'Alimentation
pour mettre l'appareil sous et hors
tension.
Touche Instantané – Utilisez la touche Instantané pour
prendre des photos numériques.
DEL d'état – Clignotte pour vous faire savoir que
vous venez de prendre une photo.
Flash – Utilisez le Flash lors de prises de vue
peu éclairées ou pour intensifier le
sujet de votre photo.

Onderdelen camera:
Aan/uit-toets - Druk op de Aan/uit–toets om de camera
in en uit te schakelen.
Snapshot-toets - Druk op de Snapshot-toets om digitale
foto's te nemen.
LED-lampje - Dit lampje knippert om u te laten
weten dat u een foto heeft genomen.
Flits - Gebruik de flits bij weinig licht of om
het onderwerp van uw foto extra te
belichten.
Display Screen
Camera Lens
Flash
USB Connection
(under cover)
USB Interface Cover

Display Screen – Use the Display Screen to preview the
image you are going to take, review images
you have taken, and to view your camera
settings.
Navigation Buttons – Press the Navigation buttons <> to enter
Playback Mode to scroll through stored
images.
USB Connection – Connects the camera to your computer. Use
the USB cable when you are ready to down
load your images.
USB interface Cover– Covers the USB connection and the lever
that allows you to remove the faceplate and
change the batteries.

Display - Auf dem Display können Sie eine
Vorschau des Motivs sehen, bereits
aufgenommene Bilder betrachten
und Ihre Kameraeinstellungen überprüfen.
Pfeiltasten - Drücken Sie die Pfeiltasten <> ,um
im Wiedergabemodus durch die
gespeicherten Fotos zu blättern.
USB-Schnittstelle - Zum Anschluss der Kamera an Ihren
Computer. Benutzen Sie das USB-
Kabel, um Ihre Fotos herunter zuladen.
Abdeckung der - Deckt die USB-Schnittstelle
USB-Schnittstelle und den Hebel ab, der das Abnehmen
der Frontabdeck ung zum Auswech
seln der Batterien erlaubt.

Touche Affichage – Utilisez l'Écran d'Affichage pour
prévisu aliser la photo que vous êtes
en train de prendre, revisualiser les
photos que vous avez prises et voir les
réglages de votre appareil.
Touches de Navigation – Appuyez sur les touches de Navigation
<> pour entrer en Mode Lecture et
faire défiler les photos stockées.
Branchement USB – Connecte l'appareil à votre ordinateur.
Utilisez le câble USB lorsque vous
êtes prêt à télécharger vos photos.
Clapet de l'interface USB – Recouvre la prise USB et le levier
permet tant de retirer la façade pour
changer les piles.

Display-scherm - Gebruik het Display-scherm om de foto
die u wilt nemen te zien, om de foto's
die u heeft genomen te bekijken,
en om uw camera-instellingen te bekijken.
Navigatietoetsen - Druk op de Navigatietoetsen <> om
de weergavestand aan te zetten, zodat u
door de opgeslagen afbeeldin gen kunt
bladeren.
USB-ingang - Sluit uw camera aan op de computer.
Gebruik de USB-kabel wanneer u uw
afbeeldingen wilt downloaden.
Klepje USB-ingang - Sluit de USB-ingang en het hendeltje
waarmee u het plaatje kunt verwij
deren om de batterijen te plaatsen af.
Flash/up button
Left/Backward
button
Navigator Pad
Delete/Down button

OK Button – Choose the OK button to make a selection
in the Menu.
Flash/Up Button – Scrolls through the different flash options
in Preview Mode.
Delete/Down Button – Press to delete one of several images from
the camera in Playback Mode.

OK-Taste - Zur Auswahl von Menüop tionen.
Blitztaste/Aufwärtspfeil - Blättert durch die verschie denen
Löschtaste/Abwärtspfeil - Zum Löschen eines Fotos aus dem

Touche OK – Appuyez sur la touche OK pour
effectuer une sélection dans le Menu.
Touche Flash/Haut – Fait défiler les différentes options de
flash en Mode Prévisualisation.
Touche Effacer/Bas – Appuyez pour effacer une ou
plusieurs photos de l'appareil en
Mode Lecture.

OK-toets - Druk op de OK-toets om een selectie te
maken in het Menu.
Flits/Omhoog-toets - Hiermee kunt u door de verschillende
flits-opties bladeren in de preview-stand.
Wissen/Omlaag-toets - Druk op deze toets om één van de
afbeeldingen van de camera te wissen
in de weergavestand.

Disney Pix Click Digital Camera
Installing the Batteries:
The camera is powered by 3 AA batteries. To install the camera
batteries:
1. Lift the rubber USB interface cover on the bottom of the camera
and gently press the lever to the left.
2. Lift the faceplate off completely and place it to the side of the
camera.
3. Insert the batteries using the battery polarity symbols (+/-) as
a guide.
4. Replace the faceplate by gently placing it back on the camera
body.
5. Replace the rubber USB cable connection cover on the bottom
of the camera.
Turning on Your Camera:
Once the batteries are installed, the camera can be turned on by
pressing the Power button. To turn the camera off, press the Power
button again.
Note: If the camera is not used for one minute, it will automatically
shut down. To restart the camera, press the Power button.
Installing the software:
You must install the Disney Pix software to download images to your
computer. Insert the Disney Pix software CD in your CD-ROM drive.
If the installation doesn't automatically start, open My Computer and
double-click the CD-ROM drive that contains the Disney Pix
software. Double-click the install folder and run the Disney Pix
2.0.exe program. Follow the instruction on the screen.
1/4
Display Screen:
Your camera's Display Screen provides information about your
camera settings. View the diagram below to understand the symbols
on the Display Screen.
The USB Connection icon shows when your camera is
Right/Forward
connected to your computer.
button
The Memory Full icon shows when you have filled your
OK button
camera's memory. Connect the camera to your computer to
download your photos. This icon will also appear if there is a
problem with the SD card.
This icon shows that one photo is about to be deleted.
This icon shows that all the pictures on the camera are about
to be deleted.
Flash
Counter
Battery Status – Shows how much battery life the camera has
Blitzoptionen im Vorschaumodus.
Speicher der Kamera im Wiedergabe
modus.
Camera Modes:
Your camera has 2 modes, Preview and Playback.
Preview Mode
Playback Mode – This mode can be used to review or delete
Camera Memory:
Your new camera stores pictures on its on-board memory. The Pix
Click camera comes with 64 MB (approximately 300 photos) of on-
board memory.
To Take Pictures with Your Camera:
1. Use the Display Screen to locate the subject of your picture and
hold the camera steady.
2. Press the Snapshot Button located on the top of the camera to
take the picture. The camera will beep and the LED will flash
once.
Note: The counter on the display will decrease by one each time you
take a picture until the memory is full.
Reviewing pictures on the camera:
Press the Navigation buttons to enter the Playback Mode.
Note: Your camera will automatically return to Preview Mode after
three seconds when you finish using the Navigation buttons to review
your pictures.
Deleting Pictures From the Camera:
1. Turn the camera on by pressing the Power button.
2. Press the Navigation buttons to enter Playback Mode.
3. Scroll through using the arrows to find your picture.
4. Once you get to the images you want to delete, press the
Delete/Down button.
5. When you see
To delete all the pictures on your camera:
1. Press the Navigation buttons to enter Playback Mode.
2. Press and hold the Down arrow for three seconds
3. When you see
– Indicates where the Flash is on, set on auto, or
off.
– Shows the estimated amount of images you are
still able to take.
left. When the low battery image appears,
make sure to change your batteries immediately.
The camera will automatically shut down when
the batteries are low.
– The camera will be in preview Mode when it is
turned on. Preview Mode is used to view your
subject when taking pictures.
pictures in your camera's memory by using the
two side arrow buttons to scroll through your
pictures.
on the screen, press again to confirm.
on the screen, press OK to confirm.
2/4