Installation & Mounting - CamOne FlyCamOne eco V2 Handbuch

Thank you for purchasing the FlyCamOne eco V2.
To ensure that you´ll have a lot of fun with it right from the start, we recommend to read the
following instruction carefully.
Product Contents:
FlyCamOne eco V2 (Main board with camera head and RX‐cable), servo arm und mounting
screw.
For the power supply, the FlyCamOne eco V2 can optionally be connected to a R/C receiver or
a separate LiPo battery.
Installation & Mounting
Connect the RX‐cable with a free channel of your R/C receiver. Now the FlyCamOne eco will be
supplied with power and can be controlled via your R/C transmitter. If you prefer an external
power supply, please connect the battery with the PCB‐
slot directly. You´ll find a list with suitable batteries in
the attachment. The cam can be switched off by the
ON/OFF switch only during battery operation!
Attach the camera to the inside or outside of the model.
Insert a Micro SD‐card (up to 8GB) into the card slot. To
ensure a correct play back of the sound and video files,
the memory card should have a writing speed of at least
4MB/sec.
www.FlyCamOne.com