Time / Date; Local Time; Default Settings - Inverto IDL 3290S-CI Bedienungsanleitung

digital audio output (SPDIF).
OSD over VCR SCART
Use this option to specify if you want to have the OSD appear on the VCR SCART outputs.
Note: This option is available only if TV SCART is set to RGB.

TIMe / DaTe

Use this menu to set the time and date.
Automatic Time Update
If the "Automatic Time Update" is set to "On", the
receiver will receive the time and date automatically
from the broadcast signal.
Note: Some networks may transmit an incorrect time
or date.
Date
Use this option to manually set the date.

local Time

Use this option to manually set the time.
Time Zone
The DVB standard broadcast time and date is for the GMT time zone. In order to display the local time correctly,
you must set the local time zone.
Note: If daylight savings is enabled then the receiver is changing automatically the time on the following
condition (valid for Europe with no time limit).
•
summer times begins and ends at 1:00 am universal time (Greenwich mean time)
•
it begins the last Sunday in March
•
it ends the last Sunday in October.
This is done in disregard of DVB broadcasted information.

DefauLT SeTTIngS

Use this option to reset the receiver to default settings.
This may be necessary when a large number of
settings have accidentally been made incorrectly, for
example. As you can see in the picture, there are
three kinds of default settings: "Factory defaults",
"Settings only" and "Preprogrammed Channel Lists".
Factory Defaults
Press the "OK" key and confirm with the "Green"
function key, if you want to reset the unit to the
"Factory default" settings.
Note: Using this option will delete all data stored in the
channel lists, and favourite lists.
After this, a "Quick Start Guide" menu will be open.
Please refer to the Quick Start Guide section of this
user manual for further information.
Settings only
Use this option to reset only the user preferences and settings, such as time and date. The channel lists will
20